Why My Garage Door Isn’t Working – Possible Reasons

Why My Garage Door Isn’t Working – Possible Reasons

It is certainly upsetting if your garage door suddenly decides to give up on you and halts all its activities. It is neither opening nor closing. Such a garage door that refuses to work can leave a person scratching his head, unsure of his next steps.

It is possible that the garage door is only acting up temporarily. However, there are also chances that the door decides to stay on its spot. This may be for longer than you expect, setting the need for a repair.

Undeniably, a garage door can ante up the value of your home by as much as 4%. Plus, it is the largest moving object in your house. Both these factors set up the need for a proper garage door maintenance. So, you can’t just give up on a door that doesn’t work.

In this regard, here are some possible reasons that explain why your garage door is not working:

  1. There is something blocking the path

The foremost thing to do when your garage door doesn’t budge from its spot is to check its path. It is likely that something is blocking its path. For instance, a tool, sporting equipment, or a small toy.

If there is nothing visible along the path, look for path blockers along the garage door’s track. Inspect the track for any buildup. A pro tip is to take a damp rag and run it along the tracks to remove anything that may be stuck in the way.

  1. There is something wrong with the remote

Sometimes the remote that controls your garage door’s working is the one to be blamed for all the not-opening drama. Some possible reasons behind remote control issues include dead batteries, blocked antenna, and more.

First of all, it is possible that you are not in close range with the garage door. Due to this, the sensors may not pick up the signals, and the remote doesn’t fulfill your command. Secondly, the remote’s batteries can be dead, so check them for solving the issue.

Thirdly, the motor’s antenna can be blocked from the signal. Therefore, check if the antenna is positioned correctly down from the motor. Lastly, the LEDs in your garage door opener could be the culprit. LEDs can be energy efficient, but they can block the transmission signals sent from the remote to the garage opener.

  1. The photo eye is blocked

Old garage doors have a photo eye that detects if an object or person is standing in the way, blocking its movement. This photo eye is typically 4-6 inches off the ground in most garage doors and is approximately the size of a pea.

The photo eye is responsible for shooting a laser across the length of the garage door for lowering it. If this laser beam is interrupted, the signal to lower the door will be cut off, and the door won’t close.

If there are problems in the photo eye, then your garage door may end up not working. It is possible that the cord linked to the eye is damaged or cut. Moreover, dust and dirt can also clog that eye and block the laser beam that it emits. Therefore, look for faults here.

  1. The cables have snapped

Another possible reason behind a garage door failure is broken springs. When a garage door torsion spring breaks, there is a loud gunshot-like sound that it creates. So, failing springs make one last call for help before they give up. You wouldn’t miss the sound unless you are not home.

Interestingly, springs are the first thing to break when it comes to garage doors. This is because these are rated for a set number of cycles after which they expire. Don’t try to open a garage door if a broken spring is causing the problem.

Instead, call a professional to handle the problem to minimize your odds of injury and save time as well. Finding professionals has become easier now than ever before. You only have to type in your location + garage door repair to get started. For instance, Google Frisco Garage Door Repair if you are in Frisco, Texas.

  1. The disconnect switch is enabled

If your garage door works normally but doesn’t move all of a sudden, then it is possible that the disconnect switch is activated. Keep in mind that garage doors have a disconnect switch for instances when you lose power.

In such circumstances, you can open or close the door manually so that you can park your car while you are out of power. The switch is usually linked to a rope or knob, which can be pulled or turned to disconnect, respectively. At times, the switch can accidentally come undone, which disconnects the door from the motor.

  1. The garage door is not on its track

A garage door can’t move if it is not on its track, making it another possible explanation behind a door that does not work. In this regard, ensure that the garage door is sliding along its metal track.

Check for any bends, gaps, obstacles, or bumps along the track. If you can’t see anything, then observe the door’s progress. You may catch the source of friction in this way. The hindrance may cause the door to squeak, slow down, or get stuck.

Summing up

Several reasons can hinder your garage door’s normal day-to-day working. You can always look for the source of the problem and try to solve it. However, if the work is significant and demands special tools, then it is best to reel in professional repair services.

Leave a Reply

Your email address will not be published. Required fields are marked *